The following are detailed specifications about the GoConex Pre-Paired Switch Kit.
Our customer service team is available M-F between 7am and 5pm, Sunday between 11am and 4pm (Pacific Time) at (800) 653-6556 to provide any information that is not listed on our website.
|Total Wattage:||600 w.|
|Wattage Per Bulb:||600|
|Switch Type:||Click turn|
|Certification Agencies:||UL, CUL, ETL, CETL|
Use the GoConex switch to turn your circuits on and off without wires. One GoConex wireless switch can be paired to control many GoConex receivers.With a wireless range of 250 feet, GoConex can switch circuits on and off everywhere in your home or business AND detached garages, gatehouses, exterior lights, barns and storage buildings.
Meet electrical freedom: CECA by GoConex, the new way to switch electricity.
I got this go connex device installed in just a few minutes and could not be happier with it. Not only did it eliminate the need for old work wiring for a switch but also adds freedom to put the switch anywhere, and I mean anywhere. It has a 250 foot radius!! So cool.
This is my second purchase of a GoConex Wireless Switch. The first two I used in my townhouse bathrooms to separate the light switch from the exhaust fan. Studs in the wall prevented me from using a conventional 3-gang switch/junction box. GoConex works with small motors and thus is the switch for my bathroom fans. The fans have two settings controlled by double tapping the switch and it works beautifully. My second purchase of the paired wall switch is for the kitchen lights. I have 4 recessed task lights & large general illumination light that share than main dimmer controlled power switch. The GoConex wireless switch is wired to turn off the large general illumination light while the recessed lights stay on. One of the wall switches is located with the main switch, while the other is near the sink for convenience. Compared to other wireless switches I have looked at, Goconex is an excellent value and the wall switch does not require an in wall box. More at, this switch mounts COMPLETELY flush to the wall surface under a standard Decora Wall Plate. Competitors wireless switches protrude out from the wall and cannot share a multi-gang wall plate presentation. It would be great if this switch was supplies with shortened white wall plate screws, as the screws supplied with a Decora wall plate are a bit long and must be ground down with a Dremel or grinder for a perfect flush to the wall installation. Great product!
Customer Service: 1-800-653-6556 or firstname.lastname@example.org
M-F: 7am-5pm & Sunday: 11am-4pm (PST)
GoConex Pre-Paired Switch Kit
Model #: SC-3WAY
Complete $item.xCollectionName Collection
This GoConex Pre-Paired Switch Kit is part of the $item.xCollectionName Collection from GoConex. The following items are also part of the $item.xCollectionName Collection.